{"id":131707,"date":"2023-08-17T20:24:24","date_gmt":"2023-08-18T03:24:24","guid":{"rendered":"https:\/\/www.stevenrhine.com\/?p=131707"},"modified":"2024-11-30T14:18:11","modified_gmt":"2024-11-30T22:18:11","slug":"segger-flasher-5-legacy-teardown","status":"publish","type":"post","link":"https:\/\/www.stevenrhine.com\/?p=131707","title":{"rendered":"Segger Flasher 5 (Legacy) Teardown"},"content":{"rendered":"

Segger Flasher 5 (Legacy) Teardown A Look Inside (Way Back Machine Link<\/a>)<\/p>\n

This is an older Flasher 5 Programming tool for ST9 and Renesas M16C\/20, M16C\/62, M16C\/80, M38 and M79 series of Flash Microcontrollers in serial mode I wish it was a Rev 3 for the RC\/8 Support But you get what you can get when you can get it. It got the Job done! Backing up the Hakko FM-202 Firmware<\/a>. I am Not sure if it could be upgraded to Rev 3 hardware. If anyone has a rev 3 please please send me some photos.<\/p>\n

Here is What it looks like inside the Segger Flasher 5
\n\"Segger<\/a>
\nRemoval of the Flasher M16 Board (This Board serves as an Interface Board tailored for the M16 Family of Microcontrollers.)
\n\"Segger<\/a>
\nClose Up Of the Flasher M16 Board Top and Bottom
\n\"Segger<\/a> \"Segger<\/a>
\nBlock Diagram of the Interface Board form Manual not sure if its the same as the M16 Above.
\n\"\"<\/a>
\nFlasher 5 Main Board Top (Programming Header Pinout ?)
\n\"Segger<\/a>
\nUpdate 11\/20\/2024 I wish to thanks one of my youtube viewers Matej for the photo of the PCB in a Flash 5 Rev 3 (PCB Rev 2) Looks like they moved the DAC board to the main board near the button.
\n\"\"<\/a>
\nISP Pinout of the Flasher 5 R1
\n\"\"<\/a>
\nMain Board Bottom of the Flasher 5 R1
\n\"Segger<\/a>
\nFlasher 5 QFP 100pin Microcontroller Renesas M16C\/62 Group<\/span> M30620FCMFP<\/a> 128K Flash.
\n\"\"<\/a>
\nM30 620 (F)lash (C)128K Rom (M)NA (FP)100P6S-A
\n\"\"<\/a>
\nThe Flash Memory TSOP48 29LV400 Flash.
\n\"\"<\/a>
\nCommunications \/ Power
\n\"\"<\/a><\/p>\n

Max3221 Serial Chip
\n\"\"<\/a>
\nPower Supply: LM317 Regulator Voltage In “up to 24V DC” (Output is 8.5V), MAX884 LDO<\/a> Regulator (Output is 3.3V), L272D<\/em><\/a> Op Amp (Unknown Use Prob Used to Generate 12V for 12V Devices).
\n\"\"<\/a> \"\"<\/a> \"\"<\/a><\/p>\n

Screen Shot of the Segger Flasher 5 Software
\n\"\"<\/a><\/p>\n

Video:<\/p>\n